mesh enabler solid output from stl inventor

Mesh objects are treated the same as solid objects and can be tweaked like any other object.

Use the Assemble, Joint, and Constrain commands on mesh geometry to infer relationships.

Use the measure distance or angle commands on mesh geometry.

Project mesh edges and vertices into 2D sketches.

Create 2D sketches on mesh planar faces.

Add work features associated to mesh geometry.

Export geometry (solid, surface, or mesh) in OBJ, STL, or DWF format.

If the original model changes, it would have to be imported anew. I can help a little if you run into problems.Note: Mesh models cannot be imported as reference models, only as converted models, and are not associated to the original file. Watch your memory usage the program can be memory intensive. Play with the 'target edges' number, i'm guessing you'll need at least 40k or more. I find that it works best if you do NOT use sharp features option, but you may need to.

You'll have to tinker with it, but you can use it to generate really amazing quad meshes. Then you input the PLY file into the Instant Meshes program (it's fantastic btw, ). Make sure and turn off all the options EXCEPT for 'selection only', and 'apply modifiers' Then you output the fully triangulated (manifold hopefully) STL as a. It's not hard once you get the hang of it, unless of course your original STL is really messy. Sometimes you can fix them automatically (the 'make manifold' button), but often you have to manually do things. Use this to find any 'bad' triangles, edges, etc. For Blender you will need to enable the 3D Printing Toolbox. I prefer Blender because it has much more control, but sometimes Meshmixer will do a decent enough job totally automatically. You can use Blender or Meshmixer to analyze and 'clean up' the STL if there are problems with the object. This is the source file I am specifically working on. I am hoping that someone might have an idea on how I can get these files converted. I am very inexperienced with this and tried to run the heal command and it didn't fix anything. I tried placing the stl into an assembly and shrinkwrapping it but it ends up with the same mesh feature. So I end up with a mesh feature that I can't do anything with. The issue I am running into is that when I run the Mesh Converter add-in for Inventor I get a composite body instead of a solid body. That way I can modify them and create an assembly with them. I am trying to take some STLs and convert them to solid bodies and save them as ipt files.

I am using Inventor 2020 and know it best.

Hopefully this is the right place to ask this question.

Mesh enabler solid output from stl inventor